The ASRock WRX90 WS EVO is an EEB workstation board for Ryzen Threadripper PRO processors, with eight DDR5 slots and a 2TB memory limit. This guide covers what memory it accepts, how ASRock describes its memory support, the rules that matter when you install, and how to match modules to the board.
The short answer
- Memory type: DDR5 ECC buffered memory, RDIMM and RDIMM-3DS.
- Slots: eight, labeled DDR5_A0 through DDR5_H0.
- Capacity: up to 2TB.
- Not supported: standard desktop DDR5, and any DDR4 or older module.
Memory specifications at a glance
| Item | Value | Source |
|---|---|---|
| Socket | sTR5, one processor | Retailer listing |
| DIMM slots | 8, labeled DDR5_A0 to DDR5_H0 | ASRock manual |
| Memory type | DDR5 ECC buffered, RDIMM and RDIMM-3DS | ASRock manual |
| Channels | 8 | ASRock manual |
| Maximum capacity | 2TB | ASRock manual |
| Speed | Up to 7600+ with overclocking | ASRock manual |
| Sleep mode (S3) | Only with 1, 2 or 4 modules installed | ASRock manual |
What is different about this board
RDIMM and RDIMM-3DS
ASRock lists both registered DIMMs and 3DS registered DIMMs. RDIMM-3DS modules stack memory dies to reach higher capacities per module, which matters if you want a large total. Always check the board's memory support list for the exact module you plan to buy.
Sleep mode depends on the module count
The ASRock manual says S3 sleep is supported only with one, two or four modules installed. A full eight module build gives the most bandwidth but cannot use that sleep state. If sleep matters to you, plan for it before you choose the layout.
Eight channel operation needs identical modules
The manual says eight channel operation requires identical DIMMs, with the same brand, speed, size and chip type. Mixing brands or sizes risks losing the channel layout, so buy the set in one order.
Speed on this board
ASRock lists up to 7600+ with overclocking, but the figure is an overclock rating, not the standard speed. The speed a system runs depends on the processor: GIGABYTE's WRX90 board page lists up to 6400 MT/s with a Threadripper PRO 9000 WX and up to 5200 MT/s with a 7000 WX, and the ASRock manual labels the memory channels at 5200 in its block diagram. We list modules for this board at DDR5-4800, DDR5-5600 and DDR5-6400. Pick the speed that matches your processor.
Install checklist
- Confirm the processor on ASRock's CPU support list, and update the BIOS if the list says you need to.
- Choose a total and divide by eight to get the module size. Eight 64GB modules make 512GB.
- Buy one set of identical modules, eight of the same brand, speed, size and chip type.
- Handle only DDR5 ECC RDIMM. The manual warns that putting DDR4 or older modules in a DDR5 slot can damage the board and the module.
- Seat each module in the right orientation. Forcing a module the wrong way can permanently damage it and the board.
- Check the ASRock memory support list for your exact module.
Sizing the total
The right total comes from your workload, and the AI workstation RAM guide shows how to work it out. For the platform as a whole, see the WRX90 RAM guide, and to compare this board with others, see the WRX90 motherboard comparison. The compatible RAM guide shows how to read a manual like this one.
Find memory for this board
Browse ASRock workstation memory, DDR5 RDIMM and the Threadripper motherboard memory collection. The ECC vs non-ECC guide explains what ECC does. If you want a module checked, send us your processor and module.
Frequently asked questions
What memory does the ASRock WRX90 WS EVO use?
DDR5 ECC buffered memory, in RDIMM and RDIMM-3DS form, in eight slots. ASRock lists a maximum of 2TB.
Can the WRX90 WS EVO use regular desktop DDR5?
No. Standard desktop DDR5 is not supported, and DDR4 or older modules must not be installed in the DDR5 slots.
Do I need eight modules on the WRX90 WS EVO?
For full eight channel bandwidth, yes. The manual says eight channel operation requires identical DIMMs. Fewer modules work but use fewer channels, and S3 sleep works only with one, two or four modules.
What speed does the WRX90 WS EVO run memory at?
It depends on the processor. ASRock lists up to 7600+ with overclocking. A Threadripper PRO 9000 WX is listed up to 6400 MT/s and a 7000 WX up to 5200 MT/s by GIGABYTE for its WRX90 board.
Does NEMIX RAM list memory for the ASRock WRX90 WS EVO?
Yes. We list DDR5 ECC RDIMM for this board at DDR5-4800, DDR5-5600 and DDR5-6400. Send us your processor and we will confirm the best match.
Sources
ASRock WRX90 WS EVO manual, retailer listing, Exxact listing and GIGABYTE MH53-G40, read on October 29, 2026. ASRock's own web pages could not be read, so confirm the memory support list and CPU support list on the ASRock site.
Buying memory for workstation fleets
Purchase orders, net terms and volume pricing are available for engineering, reseller and public-sector orders. Request a quote with your models and quantities, or contact our sales team.

