BIOSTAR EDGECOMP | INDUSTRIAL | EMBEDDED | MOTHERBOARD | MEMORY UPGRADE

5 products

Showing 1 - 5 of 5 products

Memory upgrades for BIOSTAR EdgeComp industrial and embedded PCs — the fanless edge-computing systems BIOSTAR launched in 2025 for factory automation, smart-city infrastructure, retail and POS, digital signage, robotics, machine vision, IoT gateways, in-vehicle systems and edge AI. These are not desktops or laptops: they run 24/7 in enclosures without fans, so the memory has to be the exact type the platform specifies. Every listing here is matched to a specific EdgeComp model — the DDR5 non-ECC SODIMM it takes, at the speed the processor runs it, in single modules and matched two-module kits sized to the system's slot count and ceiling. NEMIX RAM researches, matches, and compatibility-tests each module against the EdgeComp platform it is listed for, and backs it with a lifetime replacement warranty and US-based support.

Which EdgeComp takes which memory

EdgeComp MU series — low-power IoT and industrial computing on Intel N-series processors. The MU-N150 takes a single DDR5-4800 SODIMM (Intel N150 runs one channel), so the 16GB module is the upgrade.

EdgeComp MS series — higher-performance industrial PCs. The MS-N97 and MS-X7433RE (Intel N97 / Atom x7433RE) are single-channel DDR5-4800 SODIMM systems; the MS-1315UE / MS-1315URE (13th Gen Core i3-1315UE/URE) has two DDR5-4800 SODIMM slots and is listed as a 32GB module or a 64GB two-module kit. The Core i5-based MS-1335U runs DDR5-5200 in two SODIMM slots up to 96GB; if you need memory for it, contact us and we will match it.

All of these use 262-pin DDR5 SODIMM, non-ECC, 1.1V. They do not take desktop UDIMM or server RDIMM, and the systems will not run faster than the speed the processor supports even if faster modules are installed.

Single module or kit?

Check how many SODIMM slots your model has before choosing. Single-channel systems (MU-N150, MS-N97, MS-X7433RE) have one slot: buy one module in the capacity you want. Dual-slot systems (MS-1315UE/URE, MS-1335U) run dual-channel with two matched modules, which gives more memory bandwidth than a single larger module — choose the 2-module kit if you are replacing the factory memory, or a single module to fill the empty second slot.

Not covered

The EdgeComp MS-NANO / NANX (NVIDIA Jetson Orin) and MS-NAT (NVIDIA Jetson Thor) edge-AI systems use LPDDR5 memory soldered to the Jetson module and cannot be upgraded, so they are not listed here.

Other BIOSTAR platforms

Memory for BIOSTAR industrial and thin mini-ITX motherboards such as the BITWL-IHT is listed under the board name — search the board model or contact us with the model number if you do not find it.