The ZimaCube is one of the easier NAS units to upgrade: the memory slots sit right behind the side panel. This guide covers which memory fits and how to install it.
Which memory does your ZimaCube take?
| Model | Processor | Memory | Slots | ZimaSpace maximum | NEMIX RAM listing |
|---|---|---|---|---|---|
| ZimaCube | Intel N100 | DDR5 SODIMM, non-ECC | 2 | 64GB | DDR5-4800 non-ECC SODIMM, 8GB to 96GB |
| ZimaCube Pro | Intel Core i5-1235U | DDR5 SODIMM, non-ECC | 2 | 64GB | DDR5-4800 non-ECC SODIMM, 8GB to 96GB |
| ZimaCube 2 Pro | Intel Core i5-1235U | DDR5 SODIMM, non-ECC | 2 | 64GB | DDR5-4800 non-ECC SODIMM, 8GB to 96GB |
See the ZimaCube memory guide for factory memory and sizing.
Before you start
- Back up your data.
- Use a matched pair of the same capacity and speed.
- Never add or remove memory with the power on.
How to install memory in a ZimaCube
Step 1: Shut down and unplug
Shut the ZimaCube down from ZimaOS, wait until it is off, and unplug the power and every cable.
Step 2: Remove the side panel
Remove the side panel. ZimaSpace places the two DDR5 SODIMM slots on the front side of the motherboard, directly reachable without removing other parts.
Step 3: Remove the old modules if replacing
Push the clips on both sides of the slot outward and lift the module out by its edges.
Step 4: Seat the new module
Line up the notch on the module with the key in the slot. Insert a SODIMM at an angle of about 30 degrees and press it down until the side clips lock; press a full-size DIMM straight down until both latches close. It should seat without force.
Step 5: Close up and power on
Reassemble the unit, reconnect the cables and power on.
Step 6: Confirm the new total
Check the memory total in ZimaOS settings, then leave the system running under normal load to confirm it is stable.
If the ZimaCube does not start or shows less memory
- Power off and reseat each module until the clips click.
- Test one module at a time.
- Refit the original memory, then send us your model.
Frequently asked questions
Where are the memory slots in a ZimaCube?
On the front side of the motherboard, reachable after removing the side panel.
How do I install RAM in a ZimaCube?
Shut down and unplug, remove the side panel, seat the DDR5 SODIMMs until the clips lock, refit the panel and check the total in ZimaOS.
Which RAM does the ZimaCube use?
DDR5 SODIMM in two slots, up to 64GB according to ZimaSpace. The Intel processors run memory at DDR5-4800.
How much RAM does the ZimaCube 2 Pro support?
ZimaSpace ships the ZimaCube 2 Pro with 16GB (2X8GB) DDR5-4800 and rates it for up to 64GB.
Find your memory
Buying for several units
NEMIX RAM is a US-based memory specialist, in business since 1993. Every module is researched, matched, and compatibility-tested by NEMIX RAM, is JEDEC-compliant, and is backed by a lifetime warranty. Offices, labs, schools and integrators that run the same model can standardize on one kit per model. Purchase orders, net terms and volume pricing are available. Request a quote with your models and quantities, or contact our sales team.
NEMIX RAM is an independent memory supplier and is not affiliated with ZimaSpace. ZimaCube, ZimaOS and ZimaSpace names are trademarks of their respective owners, used only to identify compatible systems. Specifications are summarized from the maker's published information; check the documentation for your exact model.

